 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| APT1204R7BFLL APT1204R7SFLL POWER MOS 7 (R) 1200V 3.5A 4.700 D3PAK TO-247 R FREDFET Power MOS 7 is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching (R) losses are addressed with Power MOS 7 by significantly lowering RDS(ON) (R) and Qg. Power MOS 7 combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with APT's patented metal gate structure. * Lower Input Capacitance * Lower Miller Capacitance * Lower Gate Charge, Qg MAXIMUM RATINGS Symbol VDSS ID IDM VGS VGSM PD TJ,TSTG TL IAR EAR EAS Parameter Drain-Source Voltage Continuous Drain Current @ TC = 25C Pulsed Drain Current 1 * Increased Power Dissipation * Easier To Drive * TO-247 or Surface Mount D3PAK Package D G S All Ratings: TC = 25C unless otherwise specified. APT1204R7BFLL_SFLL UNIT Volts Amps 1200 3.5 14 30 40 135 1.08 -55 to 150 300 3.5 10 4 Gate-Source Voltage Continuous Gate-Source Voltage Transient Total Power Dissipation @ TC = 25C Linear Derating Factor Operating and Storage Junction Temperature Range Lead Temperature: 0.063" from Case for 10 Sec. Avalanche Current 1 Volts Watts W/C C Amps mJ (Repetitive and Non-Repetitive) 1 Repetitive Avalanche Energy Single Pulse Avalanche Energy 425 STATIC ELECTRICAL CHARACTERISTICS Symbol BVDSS RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions Drain-Source Breakdown Voltage (VGS = 0V, ID = 250A) Drain-Source On-State Resistance 2 MIN TYP MAX UNIT Volts 1200 4.70 250 1000 100 3 5 (VGS = 10V, ID = 1.75A) Ohms A nA Volts 3-2004 050-7390 Rev A Zero Gate Voltage Drain Current (VDS = 1200V, VGS = 0V) Zero Gate Voltage Drain Current (VDS = 960V, VGS = 0V, TC = 125C) Gate-Source Leakage Current (VGS = 30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS, ID = 1mA) CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. APT Website - http://www.advancedpower.com DYNAMIC CHARACTERISTICS Symbol Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge 3 APT1204R7 BFLL_SFLL Test Conditions VGS = 0V VDS = 25V f = 1 MHz VGS = 10V VDD = 600V ID = 3.5A @ 25C VGS = 15V VDD = 600V ID = 3.5A @ 25C RG = 1.6 MIN TYP MAX UNIT 716 132 36 31 4 21 7 2 20 24 900 200 60 50 5 40 14 4 30 50 ns nC pF Gate-Source Charge Gate-Drain ("Miller") Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS Symbol IS ISM VSD dv/ dt Characteristic / Test Conditions Continuous Source Current (Body Diode) Pulsed Source Current Diode Forward Voltage Peak Diode Recovery 1 2 dt MIN TYP MAX UNIT Amps Volts V/ns ns C Amps 3.5 14 1.3 18 Tj = 25C Tj = 125C Tj = 25C Tj = 125C Tj = 25C Tj = 125C (Body Diode) (VGS = 0V, IS = -ID 3.5A) 5 dv/ t rr Q rr IRRM Reverse Recovery Time (IS = -ID 3.5A, di/dt = 100A/s) Reverse Recovery Charge (IS = -ID 3.5A, di/dt = 100A/s) Peak Recovery Current (IS = -ID 3.5A, di/dt = 100A/s) 250 515 .5 1.1 8.3 11.5 THERMAL CHARACTERISTICS Symbol RJC RJA Characteristic Junction to Case Junction to Ambient MIN TYP MAX UNIT C/W 0.90 40 1 Repetitive Rating: Pulse width limited by maximum junction temperature 2 Pulse Test: Pulse width < 380 s, Duty Cycle < 2% 3 See MIL-STD-750 Method 3471 4 Starting Tj = +25C, L = 69.39mH, RG = 25, Peak IL = 3.5A 5 dv/dt numbers reflect the limitations of the test circuit rather than the device itself. IS -ID3.5A di/dt 700A/s VR 1200 TJ 150C APT Reserves the right to change, without notice, the specifications and information contained herein. 0.9 D=0.5 , THERMAL IMPEDANCE (C/W) 0.2 0.1 0.05 0.1 0.05 0.02 0.01 0.01 0.005 SINGLE PULSE Note: PDM t1 t2 Peak TJ = PDM x ZJC + TC Duty Factor D = t1/t2 050-7390 Rev A 3-2004 Z JC 0.001 10-5 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION 10-4 10 Typical Performance Curves ID, DRAIN CURRENT (AMPERES) 8 7 6 5 4 3 2 1 0 APT1204R7 BFLL_SFLL VGS =15,10 & 8V 7V 6.5V Graph Deleted 6V 5.5V 5V FIGURE 2, HIGH VOLTAGE OUTPUT CHARACTERISTICS RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE 0 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 3, LOW VOLTAGE OUTPUT CHARACTERISTICS 1.40 V GS 10 ID, DRAIN CURRENT (AMPERES) VDS> ID (ON) x RDS (ON)MAX. 250 SEC. PULSE TEST @ <0.5 % DUTY CYCLE NORMALIZED TO = 10V @ 0.5 I [Cont.] D 8 1.30 1.20 1.10 1.00 VGS=20V 0.90 0.80 VGS=10V 6 TJ = -55C TJ = +125C TJ = +25C 4 2 0 0 1 2 3 4 5 6 7 8 VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) FIGURE 4, TRANSFER CHARACTERISTICS 0 3.5 3 2.5 2 1.5 1 0.5 0 BVDSS, DRAIN-TO-SOURCE BREAKDOWN VOLTAGE (NORMALIZED) 1 2 3 4 5 6 ID, DRAIN CURRENT (AMPERES) FIGURE 5, RDS(ON) vs DRAIN CURRENT 1.15 1.10 1.05 1.00 0.95 0.90 0.85 -50 ID, DRAIN CURRENT (AMPERES) RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE (NORMALIZED) 50 75 100 125 150 TC, CASE TEMPERATURE (C) FIGURE 6, MAXIMUM DRAIN CURRENT vs CASE TEMPERATURE 2.5 I D 25 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) FIGURE 7, BREAKDOWN VOLTAGE vs TEMPERATURE 1.2 1.1 1.0 0.9 0.8 0.7 0.6 = 0.5 I V GS D [Cont.] = 10V 2.0 1.5 1.0 VGS(TH), THRESHOLD VOLTAGE (NORMALIZED) 0.5 0.0 -50 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) FIGURE 8, ON-RESISTANCE vs. TEMPERATURE 0 25 50 75 100 125 150 TC, CASE TEMPERATURE (C) FIGURE 9, THRESHOLD VOLTAGE vs TEMPERATURE -50 -25 050-7390 Rev A 3-2004 14 10 ID, DRAIN CURRENT (AMPERES) OPERATION HERE LIMITED BY RDS (ON) 3,000 100S 1,000 APT1204R7 BFLL_SFLL Ciss 5 C, CAPACITANCE (pF) 500 1mS 100 50 Coss 1 Crss 0.5 TC =+25C TJ =+150C SINGLE PULSE 10mS 1 10 100 1200 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 10, MAXIMUM SAFE OPERATING AREA I =I D D 0 10 20 30 40 50 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 11, CAPACITANCE vs DRAIN-TO-SOURCE VOLTAGE IDR, REVERSE DRAIN CURRENT (AMPERES) 10 VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) 16 [Cont.] 100 50 12 VDS=100V VDS=250V 8 VDS=400V 10 TJ =+150C TJ =+25C 4 10 15 20 25 30 35 40 45 Qg, TOTAL GATE CHARGE (nC) FIGURE 12, GATE CHARGES vs GATE-TO-SOURCE VOLTAGE 0 0 5 0.3 0.5 0.7 0.9 1.1 1.3 1.5 VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS) FIGURE 13, SOURCE-DRAIN DIODE FORWARD VOLTAGE 1 TO-247 Package Outline Drain (Heat Sink) 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 6.15 (.242) BSC D PAK Package Outline 4.98 (.196) 5.08 (.200) 1.47 (.058) 1.57 (.062) 15.95 (.628) 16.05 (.632) 13.41 (.528) 13.51 (.532) 3 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244) 1.04 (.041) 1.15 (.045) Drain 20.80 (.819) 21.46 (.845) 3.50 (.138) 3.81 (.150) Revised 4/18/95 13.79 (.543) 13.99 (.551) Revised 8/29/97 11.51 (.453) 11.61 (.457) 0.46 (.018) 0.56 (.022) {3 Plcs} 4.50 (.177) Max. 2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) 3-2004 0.40 (.016) 0.79 (.031) 0.020 (.001) 0.178 (.007) 2.67 (.105) 2.84 (.112) 1.27 (.050) 1.40 (.055) 1.98 (.078) 2.08 (.082) 5.45 (.215) BSC {2 Plcs.} 19.81 (.780) 20.32 (.800) 1.22 (.048) 1.32 (.052) 3.81 (.150) 4.06 (.160) (Base of Lead) 050-7390 Rev A Gate Drain Source Heat Sink (Drain) and Leads are Plated 2.21 (.087) 2.59 (.102) 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) Source Drain Gate Dimensions in Millimeters (Inches) APT's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved. |
Price & Availability of APT1204R7SFLL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |